Triton™ White Ink

Triton™ White Ink is an low bleed white designed for opacity and printability.  Great for use on dark colored garments.  It can be used with higher mesh counts without the need of a modifier.  Use as a stand alone white or underbase.  Designed for use on Cotton/Polyester Blends and 100% Cotton.  

• Low Bleed White
• superior Brightness
• Excellent Printability
• For cotton/poly blends and 100% cotton
• Very Creamy
• Fast flash w/ little tack
• For auto or manual presses

Recommended Fabrics: 
100% cotton, cotton/polyester blends and polyester. Always test print fabric before beginning a production run.

Ink Application:
Triton™ White Ink should be used right from the container without any modifications. If thinning is required, use 1% to 10% by weight of a Curable Low Bleed Reducer. Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.

Mesh and Emulsion:
85-230 t/in monofilament or, for under basing, use 110-230 t/in monofilament.
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range, for best results.

Squeegee:
65-70 Durometer, Sharp Edge

Cure Temperatures:
320°F entire ink film for multiple color prints. Test dryer temperatures and wash test printed product before and during a production run.

Clean-Up:
Any environmentally friendly plastisol screen wash

Storage:
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed