Nylon Ink - 900 All-Pro Series (FlexCure)

1180-67 Adhesive Powder is used in plastisol inks to promote adhesion. This powder can be used for both direct printing and transfers inks. When direct printing, this powder aids in obtaining good adhesion to nylon jackets and bags. When printing transfers this product can be used for adhesion on tight knit polyester fabrics. Product can be used in all Tri-Flex series colors, as well as, our transfer inks. The 1180-67 powder should be added 10-15% by weight to the plastisol ink and mixed well....

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F.  These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...