Rhinotech

A strong biodegradable press side wash designed to work quickly and efficiently on U.V., Solvent and Plastisol Inks to open dried or clogged screen images during production runs.Ideal for efficient and expedient screen washing during and after the press run Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

A citrus scented, biodegradable press side wash designed to work quickly and efficiently on Plastisol Inks to open dried or clogged screen images during production runs.Ideal for efficient and expedient screen washing during and after the press runShipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

A Citrus-scented, water-soluble screen wash designed to work quickly on Plastisol and UV Inks.Ideal for efficient and expedient screen washing after the press run.Has a higher flash point than lacquer thinner, alcohols, ketones, etc.Biodegradable, non-toxic and environmentally friendlyShipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

A Citrus-scented, water-soluble screen wash designed to work quickly on Plastisol and UV Inks.Ideal for efficient and expedient screen washing after the press run.Has a higher flash point than lacquer thinner, alcohols, ketones, etc.Biodegradable, non-toxic and environmentally friendlyShipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

Highly efficient, Ready to Use, Emulsion Reclaiming Solution.Designed for quick and convenient removal of emulsions and capillary films from screens.Excellent freeze/thaw characteristics.Ideal for use in all climates.Never separates out active ingredients.Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

The M10 Manual Operated Filtration System is constructed of chemical resistant polypropylene. It uses a 50 yard 10 micron filter media. If your drain is higher than the discharge point on the M!0 you will require a Discharge Pump to remove the water.Unit Size 23" L x 23" W x 19"HThe unit has a 12" x 17" tray on the top that the chemical drains into. On the right side there is a 3/4" bulkhead that is 6" from the floor and 13" from the front for the chemical unit to drain out of the unit. ...

Concentrated emulsion remover in a 1 pound container.  Easily removes emulsions and capillary films from your screens, and easily dissolves into water to make a reclaiming solution. Instructions for use: Add 1/2 ounce to one gallon of water Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

RB201 Permanent Blockout is a two-part blockout that is easily spread onto a screen.  When the catalyst is mixed in it creates a permanent blockout area.   The permanent blockout area will hold up to the reclaiming process saving time and money when preparing your screens.  Product will last 3-4 days in sealed container.  If blockout thickens add RBTH201 Thinner to extend life of product. Use with plastisol UV, and solvent based inksApplies evenlyQuick...

RB201 Permanent Blockout is a two-part blockout that is easily spread onto a screen.  When the catalyst is mixed in it creates a permanent blockout area.   The permanent blockout area will hold up to the reclaiming process saving time and money when preparing your screens.  Product will last 3-4 days in sealed container.  If blockout thickens add RBTH201 Thinner to extend life of product. Use with plastisol UV, and solvent based inksApplies evenlyQuick...

The RSP Model 100 is an affordable hand stretcher that has been designed to offer flexibility with easy tensioning capabilities. Accuracy is achieved through use of an adjustable locking bar system, which enables the fabric tension to be stabilized on the frame. Each stretcher has been constructed with high-quality materials, which assure years of superior service. Wide range of tensioning capabilities. Frame not included. ...

Replacement Filter media for the M-10 Filtration System (21" x 50yds - 10 Micron)

Specially formulated thick liquid to remove imbedded U.V., conventional and plastisol inks (haze / ghost images) that remain on the screen following emulsion removalHR2800 effectively lifts the haze and imbedded ink from the mesh then emulsifies and dissolves the ink constituents; resins, binders, pigments, plasticizers, etc.The solution suspends these constituents so reattachment to the mesh surface is prohibited, thus allowing for water-rinse removalExcellent degreaser, as it also removes...

Biodegradable degreaser.A non-abrasive fabric treatment that acts like a wetting agent for use on all synthetic and wire screen mesh.Provides an even sheeting of water for complete, uniform stencil adhesion.Improves film lamination and bonding of direct photo emulsions.For use prior to each stencil preparation.

Highly efficient, Ready to Use, Emulsion Reclaiming Solution.Designed for quick and convenient removal of emulsions and capillary films from screens.Excellent freeze/thaw characteristics.Ideal for use in all climates.Never separates out active ingredients.Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

Specially formulated to remove adhesive from the frame after removing the fabric.  Effectively softens the adhesive for removal.  Gel suspends the adhesive, so reattachment to the frame surface is prohibited. Directions: Apply ARP2600 directly to the surface of the frame with a bristle brushLet coating stand for 10 minutesRemove the softened adhesive with a putty knifeIf necessary, reapply the adhesive remover and repeat removal instructions - Always wear protective...

RhinoMite Frame Adhesives offer high tensile strength, impact and solvent resistance. Adhesives dry in approximately 8 -15 minutes. Once mixed, the pot life is three to five days depending on storage (ideally: stored in a sealed container to extend usage). Color: Red Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

RhinoMite Frame Adhesives offer high tensile strength, impact and solvent resistance. Adhesives dry in approximately 8 -15 minutes. Once mixed, the pot life is three to five days depending on storage (ideally: stored in a sealed container to extend usage). Color: Red Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii. ...

The RBP-1500A Adhesive Activator is an Activator Spray that acts as the catalyst when sprayed onto the adhesive causing the adhesive to harden. Net Wt 10ozShipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii.

All of Rhinotech's systems are designed for safe, convenient, easy access.Dimensions: 32"w x 36"h x 24"dPolypropylene ConstructionChemical Resistant Back Light ReadyScreen HolderEasy Clean DrainPlastic LegsSpace for Recirculation System1/4" MaterialWidth and Height specified are approx. outside dimension – Depth is inside dimension / allow 8” for the frame rack to determine the size you require. ...

All of Rhinotech's systems are designed for safe, convenient, easy access. Dimensions: 32"w x 48"h x 24"d Polypropylene Construction Chemical Resistant Back-lightOn/Off Light Switch Screen Holder Easy-clean Drain Plastic Legs Space for Recirculation System Splashless, Stainless Steel and custom-designed models available. Call for quote.  Width and Height specified are approx. outside dimension – Depth is inside dimension / allow 8” for the frame rack to determine the size you...

The Polylite Washout Booth is ideal for small textile and sign shops where space is at a premium and cost is a factor. Made from 3/8" natural polypropylene material.Dimensions: 36"w x 48"h x 24"d Chemical-resistantScreen Holder Easy-clean Drain Polypropylene ConstructionPlastic Legs (Aluminum Legs also available)Available with Back LightEasy Assembly 3/8" MaterialWidth and Height specified are approx. outside dimension – Depth is inside dimension / allow 8” for the frame rack to determine the...

Economy Series Washout Booths are available in seven (7) standard sizes, but custom sizes can also be made to order. All of Rhinotech's systems are designed for safe, convenient, easy access. The Professional & Economy Series are almost identical with the exception that the legs of the Economy Series are plastic and the Professional Series are Metal. The Professional Series is 30 inches deep and the Economy Series is 24 inches deep. The Professional Series is also vent ready and has a wand...

Professional Series Washout Booths are available in seven standard sizes, but custom sizes can also be made to order. All of Rhinotech's systems are designed for safe, convenient, easy access. The Professional & Economy Series are almost identical with the exception that the legs of the Economy Series are plastic and the Professional Series are Metal. The Professional Series is 30 inches deep and the Economy Series is 24 inches deep. The Professional Series is also vent ready and has a wand...