Recommended Fabrics:
100% Polyester, cotton/polyester blends and sublimated dyed fabrics. Use as an underbase for printing on light or dark colored polyester fabrics.
Ink Application:
7043 Guardian Gray must be printed without any modifications in order to maintain the best bleed resistance of the product. Thinning of this product is not recommended.
Screen Mesh and Emulsion:
83-160 t/in
Any direct or indirect lacquer resistant emulsion or 35-70 micron capillary film.
Squeegee:
60-70 Durometer, sharp edge.
Cure Temperatures:
275°F-325°F entire ink film for 1 minute. Test dryer temperatures and wash test printed product before and during a production run.
Clean-Up:
Any environmentally friendly plastisol screen wash.
Storage:
Recommended storage between 65°F and 90°F. Avoid storage in direct sunlight and keep containers well sealed.
Printable Version