1707 Low Bleed Superior White - is designed for printing on 100% polyester garments. This product provides maximum coverage and bleed resistance that is 2nd to none. Superior White does not contain any organic peroxides or bleaching agents. That is why this high performance ink has no odor at all. Very creamy body from start to finish. Perfect on automatic presses and manual presses as well.
Finishes with a smooth touch and super opaque appearance. Recommended for fleece, polyester jerseys and all athletic wear in the polyester family.
|
Recommended Fabrics |
| 100% polyester and cotton/polyester blends. Always test print fabric before beginning a production run. |
Ink Application | | 1707 Low Bleed Superior White should be used right from the
container without any modifications. Adding any reducers or additives can
lower the bleed resistance, opacity, or increase cure times of ink. STIR
the ink prior to printing on press and after addition of reducers or additives. |
Screen Mesh and Emulsion | | use 60-220 t/in monofilament.
any direct or indirect emulsion or capillary film in the 35 to 70 micron range,
for best results. |
Squeegee | | 60-70 Durometer: Sharp Edge |
Cure Temperatures | | 315°F to 330°F depending on ink deposit, color and dryer efficiency. Test dryer
temperatures and wash test printed product before and during a production run. |
Clean-up | | any environmentally friendly plastisol screen
wash |
Product Packaging | | Quart, Gallon |
Storage of Ink Containers | | Recommend storage at 65°F to 90°F (18°C to
32°C). Avoid storage in direct sunlight. Keep containers well sealed |