Customer Reviews
Sport Series Light Royal Low Cure Ink
  • Sport Series Light Royal Low Cure Ink
  • Light Royal 7687C Ink Low Cure
*Pantone® Color - 7687C
*Sports Teams that use this pantone - Denver Nuggets, Detroit Pistons, Golden State Warriors, Los Angeles Clippers
Price: $46.46
Part No: AILCLB6922
Availability: Stock

SIZE:


Quantity:

Light Royal 7687C Ink is part of our Sport Series.  It is a Low Cure, Low Bleed, Stretch Ink designed to cover 100% Polyester and Polyester - Cotton Blends. This Low Cure, Low Bleed, Stretch Ink has a medium body combined with superior bleed resistance. It has additional stretch that is ideal for athletic garments. Works great on both Manual and Automatic Presses. It has excellent printability and provides a good hand.

  • Low Cure 270°F (can also cure at 320°F but will reduce bleed resistance) 
  • Low Bleed
  • Stretch Ink
  • Excellent Printability
  • For 100% polyester, 100% cotton/poly blends and 100% cotton
  • Medium Body 
  • Fast flash w/ little tack
  • For auto or manual presses

*This is a list of entities that use this pantone color. This list is not exhaustive and is meant to convey approximate pantone color. Variables in printing can change actual color and the printer must decide the suitability of the color and ink. Pantone colors are updated periodically and may not reflect current pantone match of organization.

Recommended Fabrics: 
100% Polyester, 100% Cotton, and Cotton/Polyester blends. Always test print fabric before beginning a production run.

Ink Application:
Sport Series should be used right from the container without any modifications. If thinning is required, use 1% to 10% by weight of a Curable Low Bleed Reducer. Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.

Mesh and Emulsion:
85-230 t/in monofilament.
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range, for best results.

Squeegee:
65-70 Durometer, Sharp Edge

Cure Temperatures:
270°F entire ink film for multiple color prints. It can be cured at 320°F but bleed resistance will be reduced. Test dryer temperatures and wash test printed product before and during a production run.

Clean-Up:
Any environmentally friendly plastisol screen wash

Storage:
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed

Franmar Chemicals