Atlas Screen Supply (INK)

Nordic White™ Ink is designed to cover 100% Polyester and Polyester - Cotton Blends.  This ink has a very creamy consistency combined with superior bleed resistance.  Designed for use on 100% Polyester and Polyester - Cotton Blends.   High Opacity Low Bleed WhiteSuperior PrintabilityFor 100% polyester and poly/cotton blendsSoft FeelCreamy consistency Fast flash w/ little tackFor auto or manual presses ...

Puff Additive can add a raised or puff effect when mixed with standard plastisol inks.  Add 10-15% by weight of the Puff Additive to standard plastisol ink.

Ultra Soft Hand Base is a clear base used to extend and provide an Ultra Soft Feel to most plastisol ink.  A great additive to increase the printability of your ink and give an extremely soft hand to your garment.  Ultra Soft Hand Base is also a great product when printing items such as towels to give your product that soft touch. Use approximately 10%-20% to improve the hand.  The more added to the ink the more it effects the opacity.  Most inks are highly...

Atlas Gold Glitter is a metallic ink with a large flake size the provides a sparkle to your garment.  Recommended to be printed through a wide mesh opening of 25- 30 TPI for best results.

Atlas Gold Glitter is a metallic ink with a large flake size the provides a sparkle to your garment.  Recommended to be printed through a wide mesh opening of 25- 30 TPI for best results.

Crystalina Shimmer is a translucent, iridescent glitter flake in a very clear base. It is a press-ready plastisol used for creating special sparkling effects on garments. 

Atlas Copper Shimmer provides a bright metallic effect.  Stir ink well prior to each use. For best visual results, this ink should be printed last in a design.

Atlas Anti-Bleeding Gray is a bleed blocking ink that can be used as an underbase for  polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, or polyester/cotton blends High-pigmented, very opaque ink Very creamyPhthalate-free

Atlas Curable Reducer will lower the viscosity of plastisol inks without affecting the fusing characteristics.  It is recommended to use 1% to 10% by weight.  In order to maintain opacity it is also recommended to use the minimal amount possible.Please Note: Atlas Curable Reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...