Atlas Curable Reducer will lower the viscosity of plastisol inks without
affecting the fusing characteristics.
It is recommended to use 1% to 10% by weight. In order to maintain opacity it is also recommended to use the minimal amount possible.
Please Note: Atlas Curable Reducer should not be used in low bleed inks as it can lower the bleed
resistance of those type inks.
Recommended Fabrics:
Match the reducer being used with the characteristics of the ink being modified.
For Example, LO-Bleed Reducer with Low Bleed Inks.
Screen Mesh:
Determined by the ink the reducer is mixed with
Emulsion:
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range
Squeegee:
60-70 Durometer; Sharp, beveled or round depending on ink used
Cure Temperatures:
Determined by ink the reducer is mixed with
Clean-Up:
Any Eco-friendly plastisol screen wash
Storage of Ink Containers:
65° to 90°F - Avoid storage in direct sunlight; Keep containers well sealed