Special Effects

3802LF Foil Resist Additive can be mixed with most standard plastisols to make the ink resist foil during application of the foil in a heat press.  Add a maximum 10% to 15% by weight. For best foil application results, it is important to heat apply foil within 24 hours of printing and while the print is warm.

3805LF Super Stretch Clear is a specially formulated non-phthalate plastisol ink which provides exceptional stretch properties. Used as a stretch additive, it increases the elongation properties of plastisol inks. 3805LF can be used as a foil adhesive, clear carrier for PVC or glass beads. This product can also be used as an overprint to produce a glossy/wet looking finish to your prints. As an additive, add 10% to 25% to any plastisol ink to improve the stretch and elongation characteristics...

720 Softhand Clear Base is a super clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. How to Use 720 Softhand Clear 720 Softhand Clear Base can be added to the 700 Series, Multipurpose, 1100 Series, 7600 Series and 800 Series inks for improved hand, cost and printability. 720 is very clear and is highly recommended for extending any process color, especially the Pro-Brite™ Process Colors. For a...

3809 FX Gel Gloss Clear is a non-phthalate plastisol based ink that produces a "wet" look when printed on top of other flashed plastisol inks.  FX Gel Gloss Clear can be used as a low tack glitter base for a “dry-look” or hand dipped effect.  FX Gel Gloss Clear can also be used as a clear carrier/adhesive for PVC or glass caviar beads. 3809 and Foil ...