Roland VersaStudio

This 45° blade is used for cutting materials with standard thickness. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. USA-C145-1 is compatible with all Roland vinyl cutters and printer/cutters. Each blade has a .25mm offset and a 45 degree angle for use with vinyl and other adhesive backed films Blades are available individually or in a 3 pack.

This is a low cost cemented carbide blades for use with all VersaCAMM cutters and print/cut devices. Each blade has a .50mm offset and a 60 degree angle for use with vinyl and other adhesive backed films Blades are available individually or in a 3 pack

3.4 mil calendered matte or gloss white vinyl filmPermanent clear adhesive72 lb polycoated kraft liner4 year outdoor durabilityConforms to flat surfacesFor Fleet or commercial vehicle graphics, outdoor/ indoor graphics and signsCut: vinyl cutters, flat-bed printers, steel rule or thermal diesThermal/solvent/eco-solvent/UV/screen/latex ink compatible

3.4 mil calendered matte white vinyl filmPermanent clear adhesive72 lb polycoated kraft liner4 year outdoor durabilityConforms to flat surfacesFor Fleet or commercial vehicle graphics, outdoor/ indoor graphics and signsCut: vinyl cutters, flat-bed printers, steel rule or thermal diesThermal/solvent/eco-solvent/UV/screen/latex ink compatible

This swab kit (IJ-SWABKIT5-50) is intended for use on all Roland DG inkjet devices.  Swabs are used to manually clean printheads, captops and wiper assemblies.   Each swab is 5 inches long.  There are 50 swabs included in this pack.