This Universal Pallet Adhesive
has been specially formulated for use with all textile decorating ink systems
and garments to securely hold garments during the printing process. ReadyTack is
a more efficient and cost effective alternative to aerosol adhesives. A single,
properly applied, application will surpass the performance of other products
currently available, greatly reducing the frequency of reapplication.
Application
Instructions:
- Initially,
ReadyTack II should be applied directly onto a clean pallet. (If desired, ReadyTack II can also be applied directly onto pallet paper as well.)
- Best
results will be achieved when the ReadyTack II is applied in an evenly distributed
manner using a brush, roller, or ink scraping card.
- Flashing
the pallet briefly after application will accelerate the drying
process.
- As needed,
product can be re-applied directly onto previously coated pallet.
- To remove
ReadyTack II which has been applied directly to the pallet, apply ICC 926
Spray/Wipe via light mist directly onto coated area and allow to dwell for 2-3 minutes. Then using a firm, sharp
squeegee, draw a pass across the pallet towards a trash can, removing degraded
product. If any residual ReadyTack II remains simply reapply ICC 926 to affected
area. Use a cloth damp with water as a final wipe over pallet.