Perfetto Clear is a clear mixing base used to create custom ink colors or Pantone® color matches with AquaTint Pigments. PMS color formulas for both white fabric and colored garments with an underbase are provided through the Virus Mixing System, an easy-to-use online tool for PMS color match formulas.
Just one water-based ink for many fabrics, Perfetto inks can be used on 100% Polyester, 100% Cotton, Cotton/Poly blends and tri-blends through mesh counts up to 305 t/in, guaranteeing the softest hand and retention of high quality details with astonishing accuracy.
Very easy to use water-based ink that ensures extraordinary dot-gain control, allowing for the highest printing precision and low ink consumption - saving you more money at the press than other water based inks on the market.
To eliminate dye-migration on troublesome polyester fabrics, No Sublimation Base can be used as an underbase.
PVC-Free, Non-Phthalate, and Formaldehyde-Free.
Technical Data Sheet
Recommended Fabrics
100% Polyester, 100% Cotton, Cotton/Poly blends and some tri-blends.*
To eliminate dye migration problems, use No Sublimation Base
*Always test print and wash test for durability prior to beginning a production run.
Ink Application
Thoroughly mix AquaTint Pigments into Perfetto Clear base. Create your own ink colors or use the online Virus Mixing System to create Pantone® color matches for light and dark garments. "Dark garment" color formulas are designed to be printed on top of a white underbase, regardless of the garment color. If no underbase will be printed, use a "light garment" color formula. Once pigments are thoroughly mixed into the base, ink should be printed right from the container without modification. If additives are needed, select from the suitable additives below (all additives listed are Formaldehyde and Phthalate Free):
- Improve Wash Resistance: Add 3% UNIVERSAL FIX
- Further Improve Screen Stability: Add 3-5% HYDRACRYL RETARDER
Mesh Count
Up to 305 t/in
Emulsion
Any direct or indirect water resistant emulsion
Recommended: CP Tex Emulsion, for use with water based and plastisol inks.
Squeegee
60/90/60 Durometer Squeegee, Sharp Edge, 25° Angle
Cure Temperature
320°F (160°C) entire ink film for 2 minutes
Clean-Up
ReadyWash™ Ink Degradent specifically designed for water based inks
Storage
Recommended storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
**Recommended Pallet Adhesive: ReadyTack™ Pallet Adhesive is designed to be used with water based, discharge and plastisol inks. ReadyTack™ is more cost-effective than aerosol adhesives and will not break down while printing with water based inks, unlike other adhesives available on the market.***