Hydra Suede Base is a clear base that produces both suede and puff effects. To achieve a suede effect, print Suede Base E through 80 t/in mesh. For puff effect, use 30 t/in mesh.
Create custom colors by tinting with AquaTint Pigments (5-10% by weight). Hydra Suede Base E can also be printed first in the desired areas for the textured effect, and then print colors on top. Effect will appear after properly curing the ink.
Recommended Fabrics
100% Cotton
Ink Application
Thoroughly mix AquaTint Pigments into Hydra Clear 120E base. Create your own ink colors or use the online Virus Mixing System to create Pantone® color matches for light and dark garments. "Dark garment" color formulas are designed to be printed on top of a white underbase, regardless of the garment color. If no underbase will be printed, use a "light garment" color formula. Once pigments are thoroughly mixed into the base, ink should be printed right from the container without modification. If additives are needed, select from the suitable additives below (all additives listed are Formaldehyde and Phthalate Free):
- Reduce Viscosity: Add 3% of HYDRA REDUCER 120
- Improve Wash Resistance: Add 3% UNIVERSAL FIX
- Further Improve Screen Stability: Add 3-5% HYDRACRYL RETARDER
Mesh Count
Up to 305 t/in
Emulsion
Any direct or indirect water resistant emulsion
Recommended: CP Tex Emulsion, for use with water based and plastisol inks.
Squeegee
60/90/60 or 70/90/70 Durometer Squeegee, Sharp Edge, 25° Angle
Cure Temperature
320°F (160°C) entire ink film for 90 seconds
Clean-Up
ReadyWash™ Ink Degradent specifically designed for water based inks
Storage
Recommended storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
**Recommended Pallet Adhesive: ReadyTack™ Pallet Adhesive is designed to be used with water based, discharge and plastisol inks. ReadyTack™ is more cost-effective than aerosol adhesives and will not break down while printing with water based inks, unlike other adhesives available on the market.***