Geo Eco SuperStar Silver is a silver shimmer water-based ink. It is not a fine glitter, not even a metallic powder, but milled aluminum. The aluminum particles allow a superb shimmer effect and assure great brightness. Geo Eco SuperStar Silver can be tinted with AquaTint Pigments (5-10% by weight) to achieve any color desired.
Fabric Compatibility: Polyester blends, cotton blends, 100% cotton
Compliance: Water-Based, PVC-Free, Non-Phthalate, Formaldehyde-Free
Certification: OEKO-TEX STANDARD 100 CLASSES I
Technical Data Sheet
Recommended Fabrics
Polyester blends, cotton blends, 100% cotton
Ink Application
Ink should be printed right from the container, without modification. If additives are needed, select from the suitable additives below. (All additives listed are Formaldehyde and Phthalate Free)
- Hydra Reducer (3%) to reduce the viscosity of the ink
- Universal Fix (3%) to improve wash fastness
- Hydracryl Retarder (3-5%) to slow the drying of the ink
Mesh Count
Up to 80 t/in
Emulsion
Any direct or indirect water resistant emulsion
Recommended: CP Tex Diazo Emulsion for water-based, discharge and plastisol inks.
Squeegee
60 Durometer, Sharp Edge, 20° Angle
Cure Temperature
320°F (160°C) entire ink film for 2 minutes
Clean-Up
ReadyWash™ Ink Degradent specifically designed for water based inks
Storage
Recommended storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
**Recommended Pallet Adhesive: ReadyTack™ Pallet Adhesive is designed to be used with water based, discharge and plastisol inks. ReadyTack™ is more cost-effective than aerosol adhesives and will not break down while printing with water based inks, unlike other adhesives available on the market.***